Titan
3000XD is Titan Detectors Top-of-the-Line metal detector.
The next best thing to having vision to see into the ground.
Titan 3000XD is designed for every metal detecting use. You
can recover coins, rings, jewelry, relics, artifacts, gold
and many other valuable treasures. All
Titan features and functions are easy-to-see,
easy-to-read and certainly easy-to-use.
A touch of the clearly marked pads allows you to quickly start
hunting for coins and treasures without having to go through
complicated engineering instruction manuals. Titan
3000XD features audio and selective discrimination
to remove junk and trash allowing only the good signals (coins,
rings, etc.) to come through. The large easy-to-read meter
indicates a digital number to help identify the targets. You
know what you have found before you dig. (see
TARGET Readout table below)
FIRST TEXAS DETECTORS
This
detector is as simple as A-B-C to use. Example: Scan
with searchcoil. When coil goes over a target, the detector
will give you AUDIO SOUND. A-The meter will
immediately give you a digital number to indicate identity
of the target. B-Arrows on upper face of
the meter will point and confirm target. C-
Depth will be on scale, lower left of meter. Dig your target
and repeat this process. Simple isn't it?
Titan
3000XD was designed for beginners to detect at a professional
level. With a little practice, you can expect to find more
older, deeper, valuable coins and treasures with this detector!
-
Sensitivity Level
-Target ID with 11 Zones
- 0-199 Three Digit Target Indicator
-Notch Level Indicator
-Instant Target ID Indicator
-Depth Reading Indicator
-Discrimination Level
-Mode Indicator
-Battery Level
Titan
3000xd Features:
• Touchpad control buttons
• 5 modes of Operation, Super deep
[slow motion] All Metal mode, Discrimination mode with
Depth reading, Pin-point mode, ITD mode and Notch mode
• Power on and off
• Sensitivity level control with 6 levels
• Large easy view LCD screen
• Disc/all metal [mode control]
• Discrimination level control for fast and easy
Discrimination level changes
• Low battery warning indicator with 4 levels
• ITD [Instant Target ID system]
• 4 Zone notch adjust control
• 4-Tone Audio Target ID system
• True High Powered slow motion All metal mode
• True Variable Coin Depth reading 0 to
10+ inches
• High Powered, No-Motion Pin-Point mode
• 11 Zone Target Identification system with advance
microprocessor circuitry that is coupled with an advance
[0-199] Target Value indicator.
• 7-segment Target Eliminator feature
• Iron Elimination with 3 levels
• Ground balance control that features an Automatic
preset with Manual override for even more precise ground
control
• 1/4 inch headphone jack
• Interchangeable Coil System
• 8 inch Waterproof shielded High power
spider searchcoil
• Comfortable foam armrest
• Comfortable foam hand grip
• Fully adjustable lower stem
• Built-in detector stand
• Operating Frequency VLF 6.8 kHz
• Operates on Two 9-Volt Batteries •
Weighs 2.6 lbs (Includes Battery Weight) • Made
in the U.S.A. • 5-year
warranty
Titan
3000 XD Target Readout The table below list some common approximate target
value equivalents. With experience in the field, you
will recognize many types of metals by their numeric
value.
Value
Range
Possible
Objects
Value
Range
Possible
Objects
0-10
Iron
86-100
Dime
30-39
Nickel
- Small/Med, Gold Rings
107-127
Quarter
43-48
Some large gold rings - Pull-Tab
105-120
Liberty
Dollar
53-60
Screw
Cap
120-126
Franklin
Half Dollar
62-74
Zinc,
Penny
134-150
Silver
Dollar
83-88
Wheat
Cent
150-199
Large
Metal Object
Price per Unit (piece):
$433.00
(including 8.25 % tax)