The Future I-160 metal detector is a professional measuring instrument with a very high resolution antenna of 50 cm width. Compared to the Future 2005 with its 100 cm antenna the Future I-160 has a four times higher density of measured data. Compared to the Earth Imagers with its 16x lower resolution the device is most suitable for the professional archeological and industrial use. This fact is reflected also in the graphical representation inside the software Visualizer 3D.
Detailed graphics are the basis for an exact determination of the size and depth of objects. Because of the compact form of the antenna the device is not only usable for the measurement in even ground conditions. Besides the usual graphical representation the device provides two more particularities. On the one hand it makes buried object immediately visible with the horizontal live picture and on the other hand a typified ultrasound scan can be created with the vertical antenna.
The device includes the following functionality:
high resolution ground scans in 3D
live picture with horizontal ground scan antenna
live picture with vertical pin pointing antenna
graphical analysis on a computer
Because of the integrated microprocessor technology ground balance, depth measurement and data storage will be performed automatically by the Future I-160 metal detector. The evaluation of the measured data takes place at the computer where the scanned area can be analyzed in a three-dimensional graphic with the help of the software Visualizer 3d.
All of our metal detectors and geophysical detecting instruments are part of the "FS - Future Series", a line of our latest technology to detect buried objects and underground structures. Beside the measuring instruments it includes our 3D software which assures a detailed analysis of the measured results.
The Future I-160 metal detector is able to detect different ground structures and natural features of the ground. It's a professional metal detecting instrument with a 50 cm long multi-sensor antenna. Inside are 16 elliptical area multipoint sensors (EAMS) with a resolution of 0,015 uT and a sampling rate of 50 Hz. This very unique multi-sensor array is able to reflect scanned ground data in a graphical representation within the Visualizer 3D software. Thus the device is able to detect different structures and natural features of the ground like for example:
metal canisters, tanks, boxes
voids, backfillings, grave chambers, caves and tombs
steel pipes and water conduits